B&G, Accessories
-
Display Bezel
B&G Display Bezel spares for H3000 and WTP
-
Junction Box 7 Terminal
B&G Junction Box 7 Terminal 288-00-001
-
20-20 Display Colored Bezel (NON-HV)
B&G Colored Bezels for the 20/20 display (NON-HV). White, Black, Red, Green, Blue, and Yellow Bezels.
-
-
20-20 Display Colored Bezel HV
B&G Colored Bezels for the 20/20 HV display. White, Black, Red, Green, Blue, and Yellow Bezels.
-
3 Way Mast Bracket 20/20 HV
B&G 20/20hv 3 Way Mast Bracket - Lightweight, aluminium mast bracket for mounting 3 20/20HV or FFD) (2009 and later HVision Units).
-
4 Way Mast Bracket 20/20 HV
B&G 20/20 4 Way Mast Bracket - Lightweight, aluminium mast bracket for mounting 4 20/20 or FFD) (2009 and later HVision Units). 3 Way mount shown.
-
5 Way Mast Bracket 20/20 HV
B&G 20/20 5 Way Mast Bracket - Lightweight, aluminium mast bracket for mounting 4 20/20 or FFD) (2009 and later HVision Units). 3 Way mount shown.
-
Audible Alarm Pack
B&G Audible Alarm Pack is nn alarm sounder which gives additional warning of system alarms such as Shallow Water and Off Course. Installs to either the H3000 CPU or the Pilot ACP Processor.
-
213 Masthead Unit 213-00-002
B&G 213 Masthead Unit 213-00-002 has been proven over many years in applications from coastal cruising to Around the World record setting.
-
213 MHU Pack Lightweight
B&G 213 MHU Pack Lightweight Wind Sensor Masthead Unit has been proven over many years in applications from coastal cruising to Around the World record setting.
-
Gravity Switch
B&G Gravity Switch Allows the user to switch rapidly from a Sonic type boat speed sensor to a paddlewheel type.
-
Clinometer Heel and Trim Sensor
B&G Clinometer sensor can be used for measurement of either Heel Angle or Trim Angle.
-
Loadcell Sensor Pack BGH041001
B&G Loadcell Sensor BGH041001 Loadpin 1/2" (12.7 mm) enables consistent monitoring of loads on will be displayed on any B&G displays or logged on Deckman via a Performance Processor. A Shear Pin type loadcell, suitable for many applications on-board including forestay, shroud and mainsheet loads.
-
-
Loadcell Sensor Pack BGH041002
B&G Loadcell Sensor BGH041002 Loadpin 5/8" (16 mm) enables consistent monitoring of loads on will be displayed on any B&G displays or logged on Deckman via a Performance Processor. A Shear Pin type loadcell, suitable for many applications on-board including forestay, shroud and mainsheet loads.
-
Loadcell Sensor Pack BGH041003
B&G Loadcell Sensor BGH041003 Loadpin 3/4" (19 mm) enables consistent monitoring of loads on will be displayed on any B&G displays or logged on Deckman via a Performance Processor. A Shear Pin type loadcell, suitable for many applications on-board including forestay, shroud and mainsheet loads.
-
Loadcell Sensor Pack BGH041004
B&G Loadcell Sensor BGH041004 Loadpin 7/8" (23 mm) enables consistent monitoring of loads on will be displayed on any B&G displays or logged on Deckman via a Performance Processor. A Shear Pin type loadcell, suitable for many applications on-board including forestay, shroud and mainsheet loads.
-
Loadcell Sensor Pack BGH041005
B&G Loadcell Sensor BGH041005 Loadpin 1" (25.4 mm) enables consistent monitoring of loads on will be displayed on any B&G displays or logged on Deckman via a Performance Processor. A Shear Pin type loadcell, suitable for many applications on-board including forestay, shroud and mainsheet loads.
-
Loadcell Amplifier BGH040028
B&G Loadcell Amplifier BGH040028 unit provides analogue, FastNet and serial interfaces. Included in loadcell packs.
-
Barometric Pressure Sensor
B&G Barometric Pressure Sensor outputs accurate barometric pressure data for the navigator to confirm the forecast weather and determine weather trends.
-
Air Temperature Sensor
B&G Air Temperature Sensor provides accurate air temperature data and allows confirmation of the forecast weather and warns of likely changes in the weather.
